GE 600w Grow Lamp Kit - Reflector & Lamp

This is a Super Lumen Grow Kit, The Kit has a 600w Digital Dimming Ballast, Metal Reflector with E40 Lampholder & Fixing Bracket, The Reflector comes complete with a 5 Meter 3 Core Flex and moulded IEC C13 Plug, the Digital Ballast has adjustable dimming options from 250w-400-600-Super Lumen, this also has a 2 Meter Mains Lead & 13A 3Pin Plug and IEC C13 Plug making this kit plug & play for easy installation. We offer 2 Lamp options - 600w Super Lumen Lamp or a GE Growlux Premium Lamp (Click on the Lamp Option)

Product Specification

The 600w ballast is for plant cultivation, it is intended for climate room use, where it can be mounted in the climate room, or outside a climate room on a suitable non-compostable surface it is suitable for a damp location but should not be used in a wet enviroment or outdoors. The Ballast suports a high efficiency resonant and soft switching topology giving it an outstanding performance and reliability. it has for different outputs levels than be switched 250w, 400w, 600w & Super Lumen with a dimming selector illuminating your grow, It also ships with multi protection features to insure a long life and safe operation. HPS / MH Lamps operate at a very high frequency to prevent acoustic resonance and optomize lamp life. The Fanless ballast can prevent any dust or moisture from entering the housing.

Installation & Operation

Always install electronic ballasts verically, so the air can rise throughthe cooling ribs for optimal coolin, The lamp and reflector will be hot during operation, Do Not Touch the reflector or lamp during or right after operation. Make sure the power cord does not touch any hot part of the ballast or reflector.

Only Mount ballasts on a non combustable surface

Make Sure the the lamp is inserted correctly and the reflector is hung at the correct height

Connect the power cable to a electrical outlet, keep distance between your ballast to insure free air flow.

Reflectors are made from high grade pure aluminium which will oxidize and degrade over time, This results in lower reflectivity and reduced efficiency and over

10% light loss at the canopy. It is reccomended that reflectors are replaced once a year.  

Technical Specification

Input Voltage: AC220v/230v/240v

Output Voltage: 96-144v

Input Frequency: 50/60Hz

Output Voltage: 600w

Power Factor: >0.97

Crest Factor: >1.7

THD: <10%

Dimming: 250-400-600-Super Lumen

Strike Lamp: 600w HPS/MH Lamp

Protection Function: Open Circuit Protection