Bright Source 36w 6000k 600x600 IP65 LED Panel (Driver Inc) - Daylight - DSI Dimmable

The Bright Source 600 x 600 IP65 LED panel is an energy-saving fitting that fits into a standard, suspended T bar ceiling grid, the white surround coordinates to blend in seamlessly, and they are flicker-free, incorporating anti-discolouration technology as standard.

Offering excellent light output of 3600 lumens, installation of this panel frequently improves the light levels when compared to standard fluorescent fittings. 

This 600x600 LED panel has a 6000k colour temperature, commonly known as Daylight.

Energy-saving is a key consideration when selecting this product as you can instantly realise savings of up to 44%, for very little investment, providing an excellent return on investment.  Additional savings with the installation of this panel are an average lifetime of 50,000hrs with a 5 Year warranty making this a fit and forget lighting solution, saving time and maintenance cost..

This Panel is IP65 Rated LED panels offer excellent protection against dust and water ingress, making them ideal for high-moisture environments such as bathrooms and Shower rooms,

Dimmable Options Explained?

0-10v - A 0–10V dimming driver sends a low DC voltage signal to the fluorescent ballast or LED driver. The lighting changes as the voltage is varied. So, at 0v the light will dim to 0% and turn off. At 10v the driver is operating at 100% and the light will be fully on. A 0-10v dimming system can operate 10 LED products per controller. 

DALI - This panel comes complete with a TC Jolly Dali dimmable LED driver to enable this panel to be dimmed via a PC or Wall Interface system. It can be dimmed as a group or singular. This also enables the fitting to work on a corridor function and have options for pre-set scenes.

DSI - The driver receives a digital signal which tells it how to respond. The advantage of digital dimming is that fixtures are addressable. You can also have many more different levels of light output.

TRIAC - TRIAC Dimming otherwise known as phase cut dimming, TRIAC dimming act as high speed switch and are used to control the amount of electrical energy passing to the lamp. A 'trigger' dictates what point the device starts to conduct the electricity, the quicker the switch reacts the more power is let through and the later it reacts the less power, resulting in dimming of the bulb. TRIAC Dimmers include leading and newer trailing edge switches.